Lighting your home – What you need to know

/in /by

.

 

An essential element of any room, the right lighting can take a scheme from dark and dingy to cozy and welcoming with the flick of a switch.

Options are limitless, and with the popularity of “smart” lighting, you can upgrade almost any area of your home. One feature we had the fun of installing was a bathroom touch mirror that lights up with different features for your morning routine. Another common installation are Motion Sensor strip lights in the kitchen, lighting the way for those late-night snacks.

Whilst all these lighting choices are aesthetically functional, it’s important to make sure they are practical for your own home, bringing that modern living style whilst improving safety at the same time.

The following is two of our recommended lighting safety upgrades that will provide practical and stylish lighting in every room:

 

Switches and Controls

Today, the functions of a switch aren’t just restricted to switching a light on or off. There are so many designs and technologies to choose from when it comes to getting a light switch.

If you have basic switches that flick on and off with a crackle and a pop, you might want to think about this as an opportunity for an upgrade. Light switches usually last for decades after they have been installed, so they’re a long-term investment.

Dimmer switches don’t cost much more than traditional toggle switches, but they add a whole spectrum of light levels that can transform the way a room feels. And if you want a sophisticated switch, ask for models with built-in timers or smart switches, which you can program and control from anywhere in the world using your smartphone.

There’s no need to make a big change, but when a light switch is telling you it’s on its way out, there is a need to listen.

 

LED Lighting

Halogen Down Lights were a popular light fitting throughout the early 2000s, and many homes built or renovated in this era have these fittings. Homeowners looked to Halogen Downlights as practical lighting for the more basic areas of the home; Bedrooms, Bathrooms, and Laundry, or to add stylish features and warmth to Main Lounge and Dining areas.

Many are lead by misconceptions that Halogen lighting is cheaper to install, cheaper to run, and more modern. However, LED’s are a far superior lighting option for use in homes, specifically in terms of safety, energy efficiency, longevity, and reliability. For instance, Halogen downlights are rated to last up to 8,000 hours.

Now, while this might sound like a lot, it isn’t very much when you compare it to the average LED downlight, which is rated to last over 40,000 hours!

LED lighting also opens more possibilities for attractive decorative lighting and better switching options that allow you to better control your energy efficiency and increase the drama of your lighting scheme. They are the perfect replacement for your old-fashioned Halogens and are generally a simple process to install as they come as a unit of light and fitting all-in-one.

Smart lighting choices in your home help reduce your power bill while giving you the look and style you want.

 

If your feeling like it’s time for an upgrade, book in your job with Moses Electrical. Our friendly electricians can provide helpful suggestions on your upgrade options, and a premium service every time.

 

🔵 Consult 🔵 Connect 🔵 Communicate

Call Shari Now 04 476 32 40

#wellingtonelectricans

#afterhourselectricans

#serviceelectricans

#moseselectrical

 

P.S Don’t forget to Like & Follow our Facebook Page to stay up to date with our give aways and specials.

lightning

How Lightning Damages Homes And Tips For Prevention

/in /by

Everyday thunderstorms can have dangerous lightning. Lightning damages house quite as much as some of these other points, however, you might not think about it as much simply because while hail might land in a large area, lightning strikes are much less widespread.

The danger of lightning is a significant problem because of lightning damages houses. The most severe situation of lightning causing damage to a house is a fire starting up because of the lightning strike. This scenario can end in a reduction of your house, however, there are other possible approaches lightning damages houses.

Lightning can generate a power spike in your house that results in your destruction to your electronic products. Owning a smart home that is connected by electronic devices could end up in even more problems down the route because you have to check and substitute broken Owning a smart home that is connected by electronic devices could end up in even more problems down the route because you have to check and substitute broken portions of your system.portions of your system. It could be a genuine issue that gets costly quickly depending on what requires to be changed.

How Can Lightning Enter Your Home?

It may come in when it hits your home straight away. It could also come in when it hits an item on your roofing system.  This item could be your weather vane, satellite dish, or any kind of antenna you might have mounted. Your roof chimney or dormer may let lightning come into the house. When you have hidden fencing set up for your dog, this may allow lighting to go into your home. Additionally, irrigation systems may be an\ entrance for lightning. A definitive way is by using any metal pipelines that run into your house. No matter how it gets in it is crucial to keep in mind that lightning damages houses, and it is important to secure your home.

How Can You Protect Your Home from Lightning Damage?

Nobody is able to predict where lightning could and would strike, however taking preventive steps for your house is the best protection you could have. A lightning protection system is a reliable way to shield your home. Lightning causes damage to houses, but using this sort of system may help you in discharging the electricity from the lightning strike away from your house itself. A lightning protection system will stop the lightning strike to your home and generate a track for the power outside of your house. Once the system is operating properly, it puts a stop to the lightning’s likely damage to your property and family.

Surge protection is yet another option to shield your home from the impairs that could be triggered by a lightning strike. This kind of device assists to prevent any kind of damage from the lighting which will make it to your appliances or electronics.

In addition, you also have the choice of having your system secured, so that it matches these specifications as well as having any recommendations on greater protection provided. Setting up a lightning protection system as another protection beside a panel box surge protective device will be able to make sure that your house has protection from power surges that are caused by lightning and other electrical surges produced outside of your house.

Make sure to turn to emergency electrician at Moses Electrical to come in and evaluate your system. Check out the rest of our services here and Call us today on 048 904 862 to schedule an appointment!

switchboard upgrade

Taking a Look Inside Your Switchboard

/in /by

If you have been curious to know about the insides of standard switchboards, keep on reading to identify some common components of switchboards,

Rewirable Fuse

The fuse wire is capable of handling a specific amount of current up to a specified point (for example, 10amps) and as soon as this limit has been exceeded the fuse wire will break and melt the electricity flow. This normally occurs when the circuit is being overloaded or when a short circuit happens.

Circuit Breakers

Circuit breakers were utilized to switch out fuses for the subsequent overload protection equipment. The benefits circuit breakers have over fuses are their capability to be smoothly readjusted by flicking a button or switch instead of rewiring a fuse, are more delicate to current irregularities, less difficult to determine defective circuits and their reusability which helps you to save on maintenance expenses. Circuit breakers come in numerous forms, amongst  the more typical forms include:

  • MCBs — These are the modern circuit breaker which provides overload protection while being more compact which takes up less space in the switchboard. They are the most common form
  • Circuit breaker – A very early type of circuit breaker could be recognized by its huge black casing and are truly much bigger compared to the more advanced MCB other models
  • Push-button MCB – These were utilized as a fast and inexpensive way to switch out fuses by becoming a plug-in circuit breaker which still utilizes the fuse foundation. They work the same way like an\ average MCB but make use of a push-button rather than a switch.
  • Plug-in MCB – These are the updated variation of Push Button MCBs. Similarly, they also use the authentic fuse base and offer an even smoother reset feature utilising a switch and have a fast detection for off or defective circuits.

Residual Current Devices

These are electrical safety devices that detect minute adjustments in current between the red stage and black natural wires.  When a difference in current is detected (Usually due to seepage to earth due to an electrical failure), the RCD is forced to trip, causing power loss in that circuit.

They include an additional layer of protection over average MCBs simply because they can detect possibly hazardous defect currents that might not be big enough to overload the MCB instantaneously yet still can trigger damage or death to an individual.  They could be recognized as a very wide looking MCB that comes with a test button

  • Main Switch and main fuse

Both Main Switch and Main fuse are the final lines of protection on your regular switchboard. In concept, these should never blow or trip because the RCD or MCB safeguarding the circuit need to trip before these do. The main function of these two components is that they are primarily utilized to isolate power to your overall setup, which makes it secure to undertake standard electrical maintenance such as rewire fuses or switch out light fixtures or power points

All of the above concludes the typical breakdown of what you can discover within your typical domestic household switchboard.

Similar to everything electrical, when you are uncertain or concerned about anything you identify in your switchboard or what you can do with it, you are recommended to contact a licensed electrician at Moses Electrical to take a look and investigate your switchboard.

For all your switchboard needs,  give us a call on 048 904 862 to secure your peace of mind now.  You can check out the rest of our services on our website.

LED Lighting

Converting to LEDs and Saving on Your Power Bill

/in /by

In today’s market, there are numerous lighting alternatives offered for companies. Choices vary from conventional incandescent light bulbs to compact fluorescent lights known as CFLs, then the halogens, and the last one is light-emitting diodes or LEDs. There are numerous excellent LED lighting choices to pick from, and LED lighting technological innovation has come a long way. Regardless of whether you are updating current lighting or fitting lighting in a newer build, you will need to discover the proper LED light for your unique space.

Light-emitting diodes are growing to be the favoured option for basic lighting applications throughout all industries ― industrial, workplaces, automotive, broadcasting, showrooms, electronic implementation, and entertainment, to mention a few. Light-emitting Diode lighting is increasing in popularity simply because it offers an energy-efficient option to provide light for places, both inside and outside, with people-pleasing lighting, at a fraction of the expense of standard fluorescent, CFLs, and incandescent light bulbs

 

What are the excellent reasons to switch your current lighting choice to LED?

1. Energy Savings

Light-emitting diodes call for less energy simply because they pull in much less electricity compared to other lighting technologies, such as halogens and fluorescents. Light-emitting diodes only squander five per cent of the produced energy to heat, and the remainder is transformed into light. As a matter of fact, considering that they provide reduced energy consumption, light-emitting diodes produce less heat. This causes them to be the most ideal option to use in structures that could get hot — a problem that eateries or restaurants and manufacturing companies have to deal with at all times. Less heat indicates reduced demand on air conditioning devices and cooling systems. This also will make light-emitting diodes a better choice, because they are very not likely to overheat. As opposed to CFLs, LED lights are up to eighty per cent more effective and seventy-five per cent more efficient in comparison to a halogen lamp.

2. Environmentally Friendly

In contrast to fluorescents and CFLs, LEDs do not incorporate extremely toxic mercury. LEDs offers such great durability. With the use of fewer LED lamps indicates less waste in the form of packing, transport, and removal. Converting to LEDs can be a significant way to help reduce your carbon footprint

3. Affordability

Until recently, Light-emitting Diode lights were past the price point for the majority of consumers. However now, because they carry on to tackle the cost of the old or traditional light bulbs, LED technology is low-cost. After you turn over to Light-emitting Diode, you will use considerably reduced energy, and your monthly expenses will reduce — and this will happen in cost savings.

4. Longevity

Compared to other lighting appliances such as halogen and incandescent light bulbs, LED lighting fixtures endure up to twenty-five times longer, and up to three times longer than CFLs. Furthermore, light-emitting diodes do not contain filaments or glass bulbs, making them extremely long-lasting. ​​

5. Maintenance

as opposed to traditional light sources that decrease in output and suddenly fail, light-emitting diodes do not typically all of a sudden stop functioning — and they do not call for maintenance. This is not solely a great time saver but also helps you to save money on repairs and servicing.

When installing LEDs, make sure to turn to electrical professionals at Moses Electrical to tackle the job for you. Do not hesitate to give us a call today on 048 904 862 to schedule an appointment!

Switchboard Installation

Is Your Home Electrically Safe?

/in /by

Let’s say that you are about to invest in a brand new home or you own a current premise and you are uncertain about the condition of the electrics. What do you do? You contact a qualified registered electrician and have an electrical safety inspection completed.

What is an electrical safety inspection?

An electrical assessment is a procedure in which an\ authorized electrician inspects the electrical elements in your house and will make certain there is absolutely no dangerous and hazardous wiring or switchgear. The procedure normally comprises of a visual inspection of the switchboard, primary earthing conductor, mains wire, hot water system, range/stove/oven, wiring, power sockets, light switches, as well as light fittings. The procedure can possibly take a couple of hours and can additionally consist of evaluating of the installation for extra risk decrease and peace of mind.

Why would I want to do that?

For starters, an electrical inspection report can determine any places in your house or premise which may possibly become or are electrically dangerous. Electrical defects are the second top reason behind house fires. You would not want to take a chance of losing your house over a few defective points, would you? Electrical inspections can enable possible brand new property owners to bargain a much better price, assist current homeowners in preparing for electrical problems in the future and provide a level of risk decrease to insurance companies and banks.

In case you are searching at buying or selling a house occasionally your insurance company will inquire for a Certificate of Verification or COV which is usually an\ essential requirement for banking companies to agree to mortgage agreements. A C.O.V is provided with an electrical inspection document and often with a building document, it is up to you to confirm that you accept one as per your due application.

When should I get an electrical inspection done?

The most typical time to have an electrical assessment or inspection completed is for a C.O.V for a post or pre-purchase of a premise. This will give peace of mind to you and your insurance coverage, however, that is not the only time to acquire one. When you own a house that is twenty-five years or older and you are uncertain when the electrics were checked the last time, it is in your very best interests to arrange an inspection.

Older homes normally have outdated and non-compliant wires and switchgear which supply little to zero protection in opposition to fire or electric shock. In case you are ever in your roof or underneath the home and discover black metal passage or black rubber cables it is an\ indicator of dangerous cabling identified as VIR (vulcanized india rubber wire) and TRS (sturdy rubber protective covering cable) and must be examined ASAP because these wires are now regarded a high fire damage.

Who should I call?

In all areas of our business, from dealing with staff, clients, to merchants and other tradesman – Moses Electrical are honest, transparent and act with integrity.  We specialise in electrical maintenance and rewiring, complete home or office fit-outs, residential services, home ventilation systems and electrical safety audits.

Our team are upfront and will always do the right thing, even when no one is looking. When you decide that you want one of our friendly electricians to carry out an electrical safety audit on your property – just drop our team a line via our website, or give us a call on 048 904 862 to secure your peace of mind now.